Synchronization of the Glycolysis Reaction-Diffusion Model via Linear Control Law

The Selkov system, which is typically employed to model glycolysis phenomena, unveils some rich dynamics and some other complex formations in biochemical reactions. In the present work, the synchronization problem of the glycolysis reaction-diffusion model is handled and examined. In addition, a novel convenient control law is designed in a linear form and, on the other hand, the stability of the associated error system is demonstrated through utilizing a suitable Lyapunov function. To illustrate the applicability of the proposed schemes, several numerical simulations are performed in one- and two-spatial dimensions.     

Cu(II)‐promoted cyclization of hydrazonophthalazine to triazolophthalazine; Synthesis and structure diversity of six novel Cu(II)‐triazolophthalazine complexes

A novel route for the synthesis of Cu(II)‐triazolophthalazine complexes using the Cu(II)‐promoted cyclization dehydrogenation reactions of hydrazonophthalazines under reflux was presented. Two hydrazonophthalazines were cyclized to the corresponding triazolophthalazine ligands, 3‐pyridin‐2‐yl‐3,10b‐dihydro‐[1,2,4]triazolo[3,4‐a]phthalazine ( TPP ) and 3‐(3,10b‐dihydro‐[1,2,4]triazolo[3,4‐a]phthalazin‐3‐yl)‐benzoic acid ( TP3COOH ), followed by in situ complexation with Cu(II) yielding six novel Cu(II)‐triazolophthalazine complexes depending on the reaction conditions. The molecular and supramolecular structures of the Cu(II)‐triazolophthalazine complexes were discussed. The metal sites have rectangular pyramidal geometry in the [Cu(TPP)Cl₂]₂; 1 and [Cu(TP3COOEt)Cl₂(H₂O)]₂; 4 dinuclear complexes, distorted square planar in [Cu(TP3COOMe)₂Cl₂]; 3 , [Cu(TP3COOH)₂Cl₂]; 5 and [Cu(TP3COOH)₂Cl₂]·H₂O; 6 and a distorted octahedral in [Cu(TPP)(H₂O)₂(NO₃)₂]; 2 . Hirshfeld analysis showed that the O…H, C…H, Cl…H (except TP3COOH and 2 ), N…H and π‐π stacking interactions are the most important intermolecular contacts. The π‐π stacking interactions are the maximum for TP3COOH and complex 6 with net C…C/C…N contacts of 19.4% and 15.4%, respectively. The orbital–orbital interaction energies of the Cu‐N/Cu‐Cl bonds correlated inversely with the corresponding Cu‐N/Cu‐Cl distances, respectively. The charge transfer processes between Cu(II) and ligand groups were also discussed. The charge densities of the Cu(II) centers are reduced to 0.663–0.995 e due to the interactions with the ligand groups coordinating it.     

Lyapunov-based control and trajectory tracking of a 6-DOF flapping wing micro aerial vehicle

Nonlinear Dynamics - In this work, a high-fidelity nonlinear and time-periodic six degrees-of-freedom dynamic model of a flapping wing micro aerial vehicle has been developed. The model utilized...     

Mono- and penta-nuclear self-assembled silver(I) complexes of pyrazolyl s-triazine ligand; synthesis,structure and antimicrobial studies

The self-assembled [Ag (PTDM)NO₃] ( 1 ), [Ag (PTDM)₂(H₂O)]ClO₄^.H₂O ( 2 ) and [Ag₅(PTDM)₄(H₂O)₆(ClO₄)₄]ClO₄^.2H₂O ( 3 ) complexes were synthesized by the direct mixing of AgX (X = NO₃¯ or ClO₄¯) and 4,4′-[6-(3,5-dimethyl-1H-pyrazol-1-yl)-1,3,5-triazine-2,4-diyl]dimorpholine ( PTDM ) ligand in water–methanol mixture. The coordination numbers of silver range from three to five. Complex 3 is a rare case in which one nitrogen atom from the same s-triazine core of the PTDM ligand has a μ(1,1) bridging mode between Ag1 and Ag2 in the penta-nuclear array with Ag1–N1 and Ag2–N1 distances of 2.666(4) and 2.418(3) Å, respectively. Its 3D topology has a kind of primitive dense packing derived from the α-Po type structure. Hirshfeld analysis showed that the percentages of the O^…H hydrogen bonds were 32.4, 25.4, and 42.0% in complexes 1 – 3 , respectively. While the ligand showed no antimicrobial activity at the applicable concentration, the penta-nuclear complex 3 had higher antibacterial (MIC = 3.7 μmol/L) and antifungal (14.6 μmol/L) potencies toward the tested microbes compared with complexes 1 and 2 . Also, the killing doses of 3 were in the range of 7.3–58.5 μmol/L compared with 18.2–291.1 and 20.1–160.6 μmol/L for 1 and 2 , respectively. It is clear that the higher Ag-content in 3 could be the main reason for its higher antimicrobial activity.     

Lower Activation Energy for Catalytic Reactions through Host–Guest Cooperation within Metal–Organic Frameworks

Industrial synthesis is driven by a delicate balance of the value of the product against the cost of production. Catalysts are often employed to ensure product turnover is economically favorable by ensuring energy use is minimized. One method, which is gaining attention, involves cooperative catalytic systems. By inserting a flexible polymer into a metal–organic framework (MOF) host, the advantages of both components work synergistically to create a composite that efficiently fixes carbon dioxide to transform various epoxides into cyclic carbonates. The resulting material retains high yields under mild conditions with full reusability. By quantitatively studying the kinetic rates, the activation energy was calculated, for a physical mixture of the catalyst components to be about 50 % higher than that of the composite. Through the unification of two catalytically active components, a new opportunity opens up for the development of synergistic systems in multiple applications.     

Synthesis,magnetic and spectral studies of iron(III), cobalt(II,III), nickel(II), copper(II) and zinc(II) complexes of 4–formylantipyrine N(4)-antipyrinylthiosemicarbazone

4–Formylantipyrine N(4)-antipyrinylthiosemicarbazone and its metal complexes have been synthesized and characterized. Elemental analyses, molar conductivities, magnetic measurements and spectral (i.r., electronic, n.m.r., e.s.r.) studies have been used to characterize the complexes. The i.r. spectra show that the thiosemicarbazones behave as bidentate (NS) or tridentate ligands (ONS), either in the thione or thiolato form. Stereochemistries are proposed for the complexes on the basis of both spectral and magnetic studies.     

Efficient penetration of the basal plane (0001) face of ice Ih by HF at Ts=150 K: dependence on incidence energy, incidence angle, and rotational energy

Classical trajectory simulations are carried out to investigate the influence of incidence energy, incidence angle, and rotational energy on the penetration of the basal plane (0001) face of ice I(h) by HF at a surface temperature (T(s)) of 150 K. The interaction of HF with ice is modelled by pair interactions, with the pair potential fitted to ab initio (Hartree-Fock+MP2) calculations. The penetration of ice by HF occurs already at very low incidence energies, viz., E(i)>/=20 kJ mol(-1). This is much lower than the threshold incidence energy obtained for penetration of ice by HCl (E(i) approximately 96.5 kJ mol(-1)); the calculated average barrier to penetration of ice by HF is 16.0 kJ mol(-1) and is much lower than that previously reported for HCl. As was the case for HCl, penetration of ice by HF decreases with decreasing incidence energy and increasing incidence angle. Though in general, the penetration probability is independent of the molecule's initial rotational energy, penetration beyond the second bilayer (deep penetration) is suppressed by initial rotation. This suggests that, like was found for HCl, the steering operative in deep penetration is inhibited by initial rotation. Finally, because HF is a weak acid experimental observation of HF penetrated into ice may well be possible using infrared spectroscopy, and we suggest experiments along this line.     

The influence of adding marble and granite dust on the mechanical and physical properties of PP composites

Journal of Thermal Analysis and Calorimetry - The purpose of this work is to investigate the opportunity of re-using M&G wastes to get novel PP composites. Recycling of marble and granite...     

Synthesis,characterization, and evaluation of biological activities of new 4′‐substituted ruthenium (II) terpyridine complexes: Prospective anti‐inflammatory properties

The synthesis and characterization of Ru (II) terpyridine complexes derived from 4′ functionalized 2,2′:6′,2″‐terpyridine (tpy) ligands are reported. The heteroleptic complexes comprise the synthesized ligands 4′‐(2‐thienyl)‐ 2,2′:6′,2″‐terpyridine) or (4′‐(3,4‐dimethoxyphenyl)‐2,2′:6′,2″‐terpyridine and (dimethyl 5‐(pyrimidin‐5‐yl)isophthalate). The new complexes [Ru(4′‐(2‐thienyl)‐2,2′:6′,2″‐terpyridine)(5‐(pyrimidin‐5‐yl)‐isophthalic acid)Cl₂] ( 9 ), [Ru(4′‐(3,4‐dimethoxyphenyl)‐2,2′:6′,2″‐terpyridine)(5‐(pyrimidin‐5‐yl)‐isophthalic acid)Cl₂] ( 10 ), and [Ru(4′‐(2‐thienyl)‐2,2′:6′,2″‐terpyridine)(5‐(pyrimidin‐5‐yl)‐isophthalic acid)(NCS)₂] ( 11 ) were characterized by ¹H‐ and ¹³C‐NMR spectroscopy, C, H, N, and S elemental analysis, UPLC‐ESI‐MS, TGA, FT‐IR, and UV‐Vis spectroscopy. The biological activities of the synthesized ligands and their Ru (II) complexes as anti‐inflammatory, antimicrobial, and anticancer agents were evaluated. Furthermore, the toxicity of the synthesized compounds was studied and compared with the standard drugs, namely, diclofenac potassium and ibuprofen, using hemolysis assay. The results indicated that the ligands and the complex 9 possess superior anti‐inflammatory activities inhibiting albumin denaturation (89.88–100%) compared with the standard drugs (51.5–88.37%) at a concentration of 500 μg g^?1. These activities were related to the presence of the chelating N‐atoms in the ligands and the exchangeable chloro‐ groups in the complex. Moreover, the chloro‐ and thiophene groups in complex 9 produce a higher anticancer activity compared with its isothiocyanate derivative in the complex 11 and the 3,4‐dimethoxyphenyl moiety in complex 10 . Considering the toxicity results, the synthesized ligands are nontoxic or far less toxic compared with the standard drugs and the metal complexes. Therefore, these newly synthesized compounds are promising anti‐inflammatory agents in addition to their moderate unique broad antimicrobial activity.     

The Effect of Fluorinated Solvents on the Physicochemical Properties,Ionic Association,and Free Volume of a Prototypical Solvate Ionic Liquid

Solvate ionic liquid (SIL) synthesis and properties depend on a delicate balancing of cation-solvent and cation-anion interactions to produce materials containing only cation-solvent complexes and solvent-separated anions. Most SILs meeting these characteristics fall within the paradigm of oligomeric ethylene oxides (e.g. glymes and glycols) and lithium salts. Targeted functionalization of solvent molecules to achieve desired properties is a relatively unexplored avenue of research. Fluorinated solvents have significantly different electric charge distributions compared to their nonfluorinated analogs. We test the impact of solvent fluorination for a SIL created from equimolar mixtures of lithium bis(trifluoromethylsulfonyl)imide (LiNTf₂) and triethylene glycol (TEG), hereafter [(TEG)₁Li]NTf₂. In the first experiment, TEG is partially substituted with 2,2,4,4,5,5,7,7-octafluoro-3,6-dioxaoctane-1,8-diol (FTEG). This leads to a precipitous decrease in ionic conductivity and larger quantities of ionically-associated Li(NTf₂)₂⁻ species, as detected with vibrational spectroscopy. These observations suggest FTEG does not readily coordinate Li⁺ ions in a manner analogous to TEG. Computational studies reinforce this conclusion. Relative complex cation stabilities are ranked as [(FTEG)₁Li]⁺>[(TEG)₁Li]⁺. A second experiment adds FTEG as a diluent to [(TEG)₁Li]NTf₂. This places FTEG and TEG in competition to coordinate a limited number of Li⁺ ions. The resulting mixtures exhibit conductivity enhancement over the parent SIL and minimal changes in ion speciation due to the poor Li⁺ binding by FTEG compared to TEG. Positron annihilation lifetime spectroscopic studies point to increased amounts of free volume upon dilution of FTEG. This likely explains the origin of the conductivity and viscosity enhancements.